Balise

Blog

{2}

{1} {4}

{6}

{3}
Lire la suite

{0}
What is Dual-Sensor Technology?

mercredi, mars 29, 2023 | Derek Stuart

Products

The FGA900 series of compact continuous emissions monitoring systems (CEMS) is an integrated solution for flue gas measurements in smaller combustion processes.
Lire la suite
Combining a Transportable NIR-B-2K & Lancom 4 for Thermal Surveys & Combustion Optimisation

mardi, mars 28, 2023 | Philippe Kerbois

Application

In this blog, we are going to explain what the benefits are of combining thermal surveys with the transportable NIR-B-2K (Near-Infrared Borescope) and Lancom 4 gas analyser.
Lire la suite
Maintaining the Reliability and Safety of Steam Methane Reformers through Outlet System Monitoring

lundi, mars 20, 2023 | James Cross

Application

Monitoring the performance of a steam methane reformer (SMR) is a crucial process in the ammonia, methanol, hydrogen, and steel industries. However, the operation of the SMR close to its material temperature and pressure design limits poses significant reliability challenges, such as creep rupture and cracks caused by high pressures, temperature fluctuations, and mechanical loads. Therefore, regular physical inspections and monitoring of the SMR are required despite the safety risks beneath the reformer.
Lire la suite
Using Fiber-Optic Instruments (FGs) for Live Temperature Monitoring in Container Glass Furnaces

mercredi, février 22, 2023 | Philippe Kerbois

Application Products

The AMETEK Land FG series is commonly used in industrial applications such as steel production, glass manufacturing, power generation, and chemical processing, where accurate and reliable temperature measurement is critical for safe and efficient operation.
Lire la suite
Combustion Control in a Black Liquor Boiler

mardi, février 14, 2023 | Derek Stuart

Application

The kraft process is widely used to convert wood into pulp for papermaking. The process is very efficient because most of the chemicals used to process the wood can be recycled. In the process, the lignin and hemicellulose are separated from the desired cellulose fibres.
Lire la suite
Benefits of Using Medium-wavelength (MWIR) Thermal Imagers Instead of Widely Used Long-wavelength (LWIR) Cameras

jeudi, février 2, 2023 | Manfred Hayk

Products

Sir William Herschel discovered the relative energy of sunlight by using a prism and passing sunlight through it. The rainbow colours appeared, and he found that the temperature was rising when he used a thermometer to measure the temperature at the end of the visible red light.
Lire la suite
10 Reasons Why Thermal Cameras Are Preferred to Video Cameras for Furnace Monitoring.

mercredi, février 1, 2023 | James Cross

Application

Following on from a recent blog by my esteemed colleague Manfred in December, we continue the discussion on thermal imaging versus video imaging with a focus on furnace monitoring. We often get asked something along the lines of “why would I install a thermal imager when there are perfectly good high temperature video cameras available for my furnace?” It’s quite simple; accurate temperature data is extremely valuable.
Lire la suite
How to Improve Temperature Gradient and Quality of Glass Ribbons Using The LSP-HD Linescanner

jeudi, janvier 19, 2023 | Philippe Kerbois

Products

In this blog, we will explain how our line scanning LSP-HD system could reinforce the quality of glass ribbon products during the annealing process into the lehr.
Lire la suite
Understanding the Importance of 'HOT SPOT' Measurement in Non-Contact Temperature Measurement Applications

mercredi, janvier 11, 2023 | Manfred Hayk

Application

In applications for non-contact temperature measurement, the term "HOT-SPOT measurement" is commonly used to not only recognize and measure "hot spots" or areas of high temperature, but also detect cold, cooler areas and show their distribution. In principle, the temperature of an object in a process can be detected and measured in three ways:
Lire la suite
Steam Methane Reformer (SMR) Tube Metal Temperatures (TMT) Data Collection and Correction

vendredi, janvier 6, 2023 | James Cross

Application

Due to the significant number of questions about how to record and interpret tube metal temperatures from infrared pyrometers on Steam Methane Reformers and other fired heaters, we have produced the brief guide below which is the result of feedback from industry experts.
Lire la suite

Catégories

Balise

Blog

{2}

What is Dual-Sensor Technology?

Combining a Transportable NIR-B-2K & Lancom 4 for Thermal Surveys & Combustion Optimisation

Maintaining the Reliability and Safety of Steam Methane Reformers through Outlet System Monitoring

Using Fiber-Optic Instruments (FGs) for Live Temperature Monitoring in Container Glass Furnaces

Combustion Control in a Black Liquor Boiler

Benefits of Using Medium-wavelength (MWIR) Thermal Imagers Instead of Widely Used Long-wavelength (LWIR) Cameras

10 Reasons Why Thermal Cameras Are Preferred to Video Cameras for Furnace Monitoring.

How to Improve Temperature Gradient and Quality of Glass Ribbons Using The LSP-HD Linescanner

Understanding the Importance of 'HOT SPOT' Measurement in Non-Contact Temperature Measurement Applications

Steam Methane Reformer (SMR) Tube Metal Temperatures (TMT) Data Collection and Correction

REJOINDRE LA CONVERSATION